Figure 2.5 Rack Installation - Samsung OfficeServ 7200 Technical Manual

Table of Contents
Home Page
OfficeServ 7200 INSTALLATION
TECHNICAL MANUAL PART 2 MAY 2010
4) Align the two holes of the cabinet bracket and the holes of the rack brackets, and fasten
the cabinet to the rack with the two screws.

Figure 2.5 Rack Installation (4)

5) The above steps 1~4 also apply to expansion cabinets.
2.4 INSTALLING ON A WALL
This section describes how to install the OfficeServ 7200 cabinet on a wall. The optional
OfficeServ 7200 wall mount bracket is required (must be ordered separately).
2.4.1 Required Tools
• A mid-sized Phillips screwdriver
• An electric drill
• A hammer
• A wall bracket
• Four plastic anchors
• Four Phillips screws
• Four install lock screws
2.4