Table 3.3 Ports And Leds Of The Mp10 Card - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
3.2.4 MP10 LEDs
The front view of the MP10 card is shown in the picture below.
The MCP front panel components have the functions below:
Ports & LEDs
P1~P4 Ports
MISC Port
Media Card
LAN Port
SIO port
RST button
RUN LED
LAN LED
Figure 3.7 Front View of the MP10 Card

Table 3.3 Ports and LEDs of the MP10 Card

Function Description
Connection ports for the 4DLM or 4SWM daughter cards when
installed on the MP10.
Port that connects external MOH/BGM sources, paging device,
loud bell or common bell.
Slot for installing the MMC+ media storage card. This card
contains the main system software, system configuration
database, and voicemail greetings and messages.
Port for establishing the 10 Base-T/100 Base-Tx Ethernet
connection. This allows the MP to be connected to a data network.
Serial port (Samsung Use ONLY).
Button for resetting the MP10 card.
This LED indicates the status of the Main CPU operation.
- Off: Power is not connected.
- On (green): Booting, reset
- Blink (green): The Program is operating properly
This LED indicates the status of the connection to LAN.
- Off: MP is not connected to LAN.
- On (green): MP is connected LAN.
- Blink (green): MP is transmitting or receiving Data through LAN
port.
3.7
Table of Contents
Home Page
INSTALLATION
PART 3 APRIL 2007