Figure 3.6 Link Cables - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
3.2.4 Connecting MCP/MP20 to LCP
If the OfficeServ 7200 system consists of a Main Cabinet and an Extension Cabinet, connect
the MCP/MP20 board to the LCP board using link cables to transmit and receive signals
between the control boards.
1) Three link cables are needed to connect the MCP/MP20 board to the LCP board. They are
included in the LCP carton.
2) With a link cable, connect the 'Link1' port in MCP/MP20 board installed in the main cabinet and
the 'Link1' port in LCP port installed in the expansion cabinet. With the seconds link cable,
connect the 'Link2' port in the MCP/MP20 board and 'Link2' port in the LCP board. With
the third link cable, connect the 'Link3' port in the MCP/MP20 board with the 'Link3' port
in the LCP board.
LINK1 LINK3
LINK2

Figure 3.6 Link Cables

Figure 3.7 Connecting MCP/MP20 Board to LCP Board
3.8
Table of Contents
Home Page
INSTALLATION
PART 3 MAY 2010