Samsung OfficeServ 7200 Technical Manual page 106

OfficeServ 7200
TECHNICAL MANUAL
7.1.10 Connecting KDB-D/KDB-S
KDB-D and KDB-S are modules installed on a digital phone connected to the OfficeServ 7200
system. The KDB module enhances the functions of the phone and increases the number of
local ports according to module types.
Caution for connecting KDB module
KDB-D and KDB-S is only for a digital phone connected to the 8DLI board, not for a
digital phone connected to a 16DLI2 board.
• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your thumbs over the
attachment clips and press outward while simultaneously pressing
down on the keyset body with your fingertips.
iDCS KDB-DIGITAL LINE INTERFACE (FKDBD)
This is a daughterboard that can be installed only in the 18 or 28 button keyset. The FKDBD
will provide one additional DLI circuit for the connection of any digital station device such as
a keyset, add-on module or DPIM. This FKDBD will only operate when the keyset is connected
to an 8 port DLI card so it can use the second B channel. Each port on this card is intended for
REMOVE
KNOCKOUTS
Figure 7.10 Adding an iDCS Keyset Daughterboard Module
7.8
Home Page
INSTALLATION
PART 7 MAY 2010
SECURING
SCREWS
Table of Contents