Samsung OfficeServ 7200 Technical Manual page 141

OfficeServ 7200
TECHNICAL MANUAL
THE TWO [LINK TYPE] SETTINGS
From the <Link Control> window's [Link Type] field, select one of the two following
connection methods:
• Modem:
Use
(COM 1~10: We suggest using an external modem for this purpose.)
• LAN:
Use the
(You may use a cross-over LAN cable to connect directly to the key phone system's LAN
port. Alternatively, you may use a straight LAN cable to connect to the network.)
If the Link Type for a particular site is set to LAN, an IP address must be obtained from the
System Administrator. This IP address may be programmed into the system using MMC 830.
Once programmed, the same IP address must be entered on the IP Address line in Link
Control. Enter the IP Address of the MP10/MP10a/MCP/MP20/MP40 card and then click the
[Update] button to save the change. If different ports need to be used, then uncheck the
[Default Port] box and then enter the appropriate port information for the [Data Port]
(MP10/MP10a/MCP/MP20/MP40 Connectivity) and the [File Port] (Upload Files to Storage
Media.)
Entering the system IP
The IP address field in the OIT refers to the OfficeServ 7000 Series system's IP address
to which the OIT will connect. The information can be verified by logging into an
OfficeServ 7000 Series system via KMMC, and then by viewing MMC 830 'ETHERNET
PAR' .
the PC's modem
PC's LAN to
Figure 7.39 Site List Detailed Information
to connect to the
connect to the
7.43
INSTALLATION
PART 7 MAY 2010
key phone system.
key phone system.