Table 7.3 Officeserv Manager Specification - Samsung OfficeServ 7200 Technical Manual

OfficeServ 7200
TECHNICAL MANUAL
WARNING: Do not attempt to connect commercial AC power to these contacts.
1) After connecting a common bell, you must assign it in MMC 601 to a group as a ring
destination by using the code for common bell.
2) After wiring to the contact pair, set contacts for continuous or steady operation.
3) Next, program hunt group to include the common bell.
4) Assign the trunk to ring the hunt group containing the common bell. Common bell
control can be used with station hunt groups, individual stations and universal answer.
7.2.5 Ring Over Page
When a customer-provided paging system is installed, incoming calls can be assigned to ring
over page. Program the C.O. line or C.O. lines to ring a hunt group. Using MMC 601 assign the
DN number of the Page Output (voice) for the MIS board being used as a member of the
group or as the NEXT PORT for the overflow destination. Other stations may be assigned to
the same group to provide ringing to phones and the paging system at the same time.
FUNCTION # in MMC 724
7.2.6 Connecting OfficeServ Manager
OfficeServ Manager (OSM) is a windows based computer application that provides
maintenance and management functions for the OfficeServ 7200.
The minimum requirements for a PC running OfficeServ Manager (OSM) are as follows:
Platform
CPU
OS
Main memory
Hard disk
Beginning with system software version 4.14K technician must use OfficeServ Installation
Tool.
MIS
03

Table 7.3 OfficeServ Manager Specification

Category
7.37
Home Page
DEFAULT
DN
3751
Specification
IBM PC
Pentium III or higher
Windows 2000 or higher
64Mb or higher
1Gb or higher
Table of Contents
INSTALLATION
PART 7 MAY 2010