Samsung OfficeServ 7200 Technical Manual page 132

OfficeServ 7200
TECHNICAL MANUAL
MOH/BGM source #1
MOH/BGM source #2
• MISC 1 and MISC 2 ports are located on the front panel of the MCP/MP20.
MMC
Select music sources for C.O. lines in MMC 408 and music sources for extensions in
MMC 308. For detailed instructions on the MMC programs, refer to
Programming
The following ports are assigned to the external MOH inputs on the MIS daughtercard:
HARDWARE
ITEM
MOH/BGM Ext. Source #1
MOH/BGM Ext. Source #2
7.2.2 Connecting External/Additional Page Equipment
Instead of an internal speaker, external broadcasting equipment, such as amps or speakers,
and additional equipment that can broadcast page (ring) signals outside a building can be
connected to the OfficeServ 7200 system.
Connect external/additional paging equipment to the MISC1 and MISC2 ports of the
MCP/MP20 board. The MIS optional daughterboard should be installed on the MCP/MP20
board. The power of the external/additional paging equipment should be connected
separately.
The MIS daughterboard provides a voice pair and a two dry contact pairs to be used with
customer-provided paging equipment. Connect the customer-provided paging equipment to
the page output pins of a MIS daughterboard
PINS 4 & 5
PINS 2 & 7
Figure 7.32 Connecting MOH/BGM Sources
Manual.
MISC
FUNCTION # in MMC 724
01
02
(see Figure 7.33).
7.34
Table of Contents
Home Page
INSTALLATION
PART 7 MAY 2010
MISC 2
MISC 1
OfficeServ 7200
DEFAULT
DN (Ports)
3762
3763