Samsung OfficeServ 7200 Technical Manual page 102

OfficeServ 7200
TECHNICAL MANUAL
CONNECTING TO 8COMBO/8COMBO2
Connect a digital phone to the 8COMBO/8COMBO2 board by using a twisted pair of AWG #24 or
AWG #26 wires.
D1-D8 Port
Pin No.
Function
7.1.4 Connecting an IP Phone
Refer to the ITP-5121D Keyset User Guide, ITP-5112L Keyset User Guide, ITP-5107S Keyset User
Guide, SMT-i3105 User Guide, SMT-i5210 User Guide, SMT-i5220 User Guide, SMT-i5230 User
Guide, and SMT-i5243 User Guide for information on connecting IP keysets.
7.1.5 Connecting SIP Stations
There is no physical SIP station card required to use the SIP station service. In order to use a
generic (non-Samsung) SIP device (phone, softphone, terminal adapter), the OfficeServ
system must be IP-enabled. This means the OfficeServ system must have a SIP Stack License
key, MGI channels virtual ports, MGI channels, with the latest software MP software, and have
a high speed internet connection. Please refer to the "OfficeServ Series SIP Station Quick
Reference Document" for more detailed information about configuring the OfficeServ SIP
Server.
7.1.6 Connecting Cards to LAN
WIM/PLIM/PLIM2/GSIMT/GPLIMT/4DSL/MGI-16/MGI/MCP/MP20/SVMi-20E/OAS boards can
be connected to a LAN by using an Ethernet cable.
Pin No.
WIM/MCP/MP20/
MGI-6/MGI/4DSL/
SVMi-20E/OAS
PLIM/PLIM2
GSIMT/GPLIMT
1 2 3
- - - DLI TIP
Figure 7.6 RJ-45 Port of the 8COMBO/8COMBO2 (For Digital Phone)
1 2 3
Tx+ Tx- Rx+
Rx+ Rx- Tx+
Figure 7.7 LAN Connections
7.4
Home Page
D1~D8 Port
(RJ-45)
4 5 6
DLI RING -
RJ-45
port
4 5 6
- - Rx-
- - Tx-
Table of Contents
INSTALLATION
PART 7 MAY 2010
7 8
- -
7 8
- -
- -