Samsung OfficeServ 7200 Technical Manual page 67

OfficeServ 7200
TECHNICAL MANUAL
Ports & LEDs
P1~P4 LED
FUL
100
ACT
LNK
Refer to figure 3.48 below for the wiring in P1~P4.
P1-P4 Port (RJ-45)
PinNo. 1 2
P1-4 - -
LAN Tx+ Tx-
Function Description
These LEDs indicate the status of the ports.
- Off: The link is not connected.
- On: The link is operating.
- Blink: The data is being transmitted/sent.
Checking Full/Half duplex Operation(LED on at full)
Checking 10/100M speed(LED on at the speed, 100M)
LED Blinks on transmission/receipt of data.
Checking if the link is connected.
3 4 5
- TIP RING
Rx+ - -
Figure 3.48 4DSL Card Ports (P1~P4) Wiring Pinout
3.49
Home Page
6 7 8
- - -
Rx- - -
Table of Contents
INSTALLATION
PART 3 MAY 2010