Kenwood NEXEDGE NX-200 Function Reference page 530

23 FUNCTIONS LINKED WITH A VEHICLE
23.2 Controlling Car Behavior by Linking with the Horn Alert Port State (Horn Alert)
Note
• The Horn Alert port is not deactivated even if the matching status of DTMF and 2-tone is reset, and if the amount of time configured for
the Horn Alert Logic Signal is longer than the length of time configured for the Auto Reset Timer for DTMF or 2-tone. The Horn Alert
port is deactivated when the amount of time configured for Horn Alert Logic Signal elapses.
• Horn Alert is deactivated if one of the following operations is enabled while Horn Alert is activated:
• If the Horn Alert key is pressed (Horn Alert will be disabled)
• If the state of the microphone hook is changed
• If a key is pressed
Configuration using KPG-111D/ DN
Configuring the Horn Alert Logic Signal (
Activating the Horn Alert by Linking with the Microphone Hook
(Off-hook Horn Alert)
Off-hook Horn Alert can be used to activate the Horn Alert function linked with the microphone hook status.
Refer to Conditions to Activate the Horn Alert on page 494
Configuration
Enabled Horn Alert is activated regardless of the microphone On- or Off-hook state.
Disabled Horn Alert is activated only if the microphone is On-hook.
Configuration using KPG-111D/ DN
Configuring the Off-hook Horn Alert (
FUNC (K)/Ver 4.00
Inactive
500 ms
Active
500 ms
Figure 23-1 Pulse 1
Inactive
Active
1 s
Figure 23-2 Pulse 2
See FPRG 8.10.1 Common Page 1 Tab)
for conditions to activate the Horn Alert.
Table 23-3 Off-hook Horn Alert
FPRG 8.10.1 Common Page 1 Tab)
See
500 ms
500 ms 500 ms
500 ms
1 s
Description
CONTENTS INDEX 496