Kenwood NEXEDGE NX-200 Function Reference page 452

17 COMMUNICATION SECURITY
17.3 Encryption (NXDN Digital)
 Disabling the Encryption
1
Press the Scrambler/ Encryption
The " " icon disappears and Encryption will be disabled.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Configuring the Encryption Key Data Used for Communications
The transceiver enters the Scrambler/ Encryption Code Mode by pressing and holding the Scrambler/ Encryption key for
which the Scrambler/ Encryption Code is assigned. In the Scrambler/ Encryption Code Mode, the encryption key data used
for communications can be configured by selecting the key data from the Multi-key List. (Refer to
423.)
Or, pressing the Menu key places the transceiver in Menu Mode and then selecting "Scrambler/ Encryption Code" places
the transceiver in Scrambler/ Encryption Code Mode so as to configure the encryption key data to be used for
communications. (Refer to
Note
• In an NXDN Conventional system, the Multi-key List Number having the encryption key data can be configured for each channel.
• In an NXDN Trunking system, whether the Multi-key List Number having the encryption key data is configured for the transceiver or for
each GID can be selected.
• This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver
1
Press and hold the
The transceiver enters Scrambler/ Encryption Code Mode and
the configured Key Data appears.
FUNC (K)/Ver 4.00
key while Encryption is enabled.
3.4 Using Menu Mode on page
Scrambler/ Encryption key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
FPRG 8.12 Key Assignment Window)
See
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Multi-key List on page
Mobile
CONTENTS INDEX 418