Kenwood NEXEDGE NX-200 Function Reference page 490

19 SCAN
19.8 Common Functions for Scan
CH/GID Recall
CH/GID Recall is a function to migrate to the last called Zone-channel or GID by pressing the CH/GID Recall key during
the scan.
Note
• If pressing the CH/GID Recall key while no signal is received after initiating a scan, the transceiver migrates to the channel or GID
from which the transceiver initiated the scan.
• If CH/GID Recall is enabled, the transceiver does not resume scanning even if the length of time configured for Dropout Delay Time or
Dwell Time elapses.
• If CH/GID Recall is enabled, CH/GID Recall is disabled if the channel or GID is changed. The transceiver resumes scanning after the
Key Delay Time elapses (1 sec).
• If CH/GID Recall is enabled, the transceiver does not initiate Lookback.
• If CH/GID Recall is enabled, a Scan Stop Tone sounds from the transceiver at 30-sec intervals. The Scan Stop Tone does not sound
from the transceiver while the transceiver receives a call, unmutes the speaker and emits the received audio. Also, the tone does not
sound while the transceiver is transmitting. The tone sounds at 30-sec intervals after the transceiver completes transmission.
Operating the Transceiver
1
Press the CH/GID Recall
The transceiver pauses scanning after migrating to the last
received Zone-channel or GID.
"RCL" appears on the sub-display.
2
Press the CH/GID Recall
"RCL" on the sub-display disappears and the transceiver resumes scanning.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Priority-channel Stop Tone
Priority-channel Stop Tone is a function to emit the Priority-channel tone from the transceiver when the transceiver
receives during the scan on a Priority Channel and then pauses scanning.
Configuration using KPG-111D/ DN
Configuring the Priority-channel Stop Tone to be enabled or disabled (
FUNC (K)/Ver 4.00
key during the scan.
key while the transceiver is migrating to the last called Zone-channel or GID.
See
FPRG 8.12 Key Assignment Window)
FPRG 8.13.1 Scan Tab)
See
CONTENTS INDEX 456