Kenwood NEXEDGE NX-200 Function Reference page 486

19 SCAN
19.8 Common Functions for Scan
 Other than NX-200S/ NX-300S
1
Press the Zone Delete/Add
If the selected zone is configured to be scanned, the zone is deleted from the target zones for scanning. The "
disappears.
If the selected zone is not configured to be scanned, the zone is added to the target zones for scanning. The "
appears.
If "Scan Delete/Add" is selected after entering Menu Mode by pressing the Menu key, "DELETE" or "ADD" must be selected.
(Refer to 3.4 Using Menu Mode on page
Note
• This function cannot be used if "Single" is configured for the Scan Type.
• By pressing the Zone Delete/Add key during a scan, the Key-error Entry Tone sounds from the transceiver, and this operation has no
effect to the transceiver.
• By pressing the Zone Delete/Add key while a scan is a temporarily paused, the zone will be temporarily deleted from or added to the
target zones for scanning. This status is retained until the scan is stopped by pressing the Scan key, and the status will be cleared
when the scan is complete.
• Pressing the Scan Delete/Add key while a scan is temporarily paused, the status information for adding or deleting the zone to or from
the target zones for scanning is retained in the transceiver.
• If "List" is configured for Scan Type, a zone can be added to or deleted from the target zones for scanning only while the scan is
temporarily paused.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Scan List
Scan List is the list for which a target zone of the List Scan is configured.
Scan List can be configured using KPG-111D/ DN for Conventional Group, LTR Trunking System, or NXDN Trunking
System.
Note
Scan List can be used only if "List" is configured for Scan Type.
Configuration using KPG-111D/ DN
• Configuring the Scan List (Conventional Group) (
• Configuring the Scan List (LTR Trunking System) (
• Configuring the Scan List (NXDN Trunking System) (
FUNC (K)/Ver 4.00
key.
23.)
FPRG 8.12 Key Assignment Window)
See
FPRG 8.2.14 Scan List)
See
FPRG 8.6.12 Scan List)
See
See
FPRG 8.8.8 Scan List)
CONTENTS
" icon (left)
" icon (left)
INDEX 452