Kenwood NEXEDGE NX-200 Function Reference page 495

20 OPTIONAL BOARD
20.2 VGS-1
Transceiver Behavior
1
Auto Recording is activated.
The " " icon appears.
Configuration using KPG-111D/ DN
Configuring the Auto Recording (
Recording Transmitted or Received Audio Manually
(Voice Memo (Manual Recording))
Voice Memo (Manual Recording) can be used to manually record transmitted or received audio.
The transceiver can record the following types of audio:
• Voice spoken into the microphone
• Audio transmitted by pressing the PTT switch
• Audio transmitted in Emergency Mode
• Received audio
When the transceiver completes recording audio, the audio data is automatically stored in the VGS-1 flash memory. A user
can hear stored audio by using Message Playback. (Refer to
page 466.)
Voice Memo can be enabled or disabled and the maximum recording time and the recording method can be configured
using KPG-111D/ DN.
Voice Memo can be configured in steps of 30 sec, but a Voice Memo can actually be recorded in steps of 15 sec.
If 60 sec is configured for Voice Memo, a maximum of 4 Voice Memos (15 sec x 4 memos = 60 sec) can be recorded.
Item Range
Disable,
Voice Memo
30 to 300
Check
Latest
(Enable)
Received
Message
Uncheck
Stack
(Disable)
Pressing the Voice Memo key causes the transceiver to enter Voice Memo Mode, and then the transceiver can start
recording.
Or, the transceiver can start recording when "Voice Memo" is selected after entering Menu Mode by pressing the Menu
key. (Refer to 3.4 Using Menu Mode on page
FUNC (K)/Ver 4.00
See FPRG 8.11.3 VGS-1 Tab)
Table 20-2 Voice Memo Functions
VGS-1 recording channels used for Voice Memo can be configured in steps of 30 sec.
Voice Memo is not available if "Disable" is selected. A maximum of 300 sec can be configured for the
recording channel.
If audio has already been recorded on all recording channels, new recording data overwrites the oldest
data stored on a recording channel.
If audio is recorded on all recording channels, new audio cannot be recorded.
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Playing Back the Recorded Audio (Message Playback) on
Description
CONTENTS
Mobile
INDEX 461