Kenwood NEXEDGE NX-200 Function Reference page 339

12 FleetSync
12.3 Transmitting/ Receiving a PTT ID
12.3 Transmitting/ Receiving a PTT ID
A PTT ID is a unique identification code of the transceiver transmitted by pressing or releasing the PTT switch.
The caller's ID can be displayed on the main display using the received PTT ID while communicating with the caller. The
user can confirm the caller not only by voice, but also through the display. Also, the administrator or dispatcher can identify
by a PTT ID who is using a channel without asking by voice for the caller's name.
PTT ID Type
PTT ID Type is the type of PTT ID to be sent.
To send a FleetSync ID as the PTT ID, "FleetSync/MDC-1200" must be configured for PTT ID Type by using KPG-111D/
DN. In addition, Fleet (Own) and ID (Own) must be configured. (Refer to
301.)
Configuration using KPG-111D/ DN
Configuring the PTT ID Type (
Timing for Sending the PTT ID
The PTT ID is sent with the following timing.
 BOT (Beginning of Transmit)
The PTT ID is added to a signal at the beginning of the transmission.
 EOT (End of Transmit)
The PTT ID is added to a signal at the end of the transmission.
 Both (BOT and EOT)
The PTT ID is added to a signal at the beginning and end of the transmission.
FUNC (K)/Ver 4.00
FPRG 8.10.6 Common Page 4 Tab)
See
PTT Press
Transmit BOT
Figure 12-3 BOT
PTT
Press
Transmit
Figure 12-4 EOT
PTT Press
BOT
Transmit
Figure 12-5 Both
About Own ID (Fleet (Own)/ ID (Own)) on page
Release
Release
EOT
Release
EOT
CONTENTS INDEX 305