Kenwood NEXEDGE NX-200 Function Reference page 338

12 FleetSync
12.2 Available Calls
In Selcall Mode, a user can select the ID of the target transceiver from an ID List or directly enter an ID. Also, in Status
Mode, a status to be sent can be selected from the Status List or the status can directly be entered. In either mode, the
entry method can be changed by a user pressing and holding the Menu ([
switch the entry method.
Reception
Checking a Received Selective Call, Status Message or Short Message
Note
This function can be used only for each channel or GID in the zone where "FleetSync" is configured for Signaling Type.
FUNC (K)/Ver 4.00
Press and hold the
Menu ([ ]) or [*] key,
or press the Left key.
* If Manual Dialing = Check is enabled.
Normal Mode
Press any key.
Each Receive Mode
Normal Mode
*1
,
Side 1
*2
Triangle
Stack Mode
or
Press and hold the Menu ([
Right/Home key
or press the Left key.
ID display
Status Message/ Short Message display
Channel Name display
Time Stamp display
*1 NX-200/ NX-210/ NX-300/ NX-410/ NX-411
*2 Mobile
]) or [*] key. Pressing the Left key can also
Status Mode
Press and hold the
Menu ([ ]) or [*] key,
or press the Left key.
* If Manual Dialing = Check is enabled.
Receiving a Selective Call,
a Status Message or
a Short message.
Press the Stack key.
]) or [*] key,
CONTENTS INDEX 304