Table of Contents
Advertisement
CHAPTER 3: CONFIGURING THE D20E FIRMWARE
D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
5.
Click Next to continue the configuration of the new project.
Result: The Summary page appears showing the project details.
6.
Click Finish. Result: The Welcome page appears.
7.
Click Next.
Result: The Providers page appears.
8.
Select the D20E IO module model.
Select the D20E IO model from the drop-down list tab. Selecting the correct hardware
part number will auto configure the IO Provider with scaling, controls and alarm
values. The default projects vary for the D20E-A, K and C models; accordingly, a
specific project is available for each model. All D20E-S board variations share a single
default project.
GE INFORMATION
45
Advertisement
Table of Contents
