Table of Contents
Advertisement
Specifications
26
D20E Ethernet I/O Modules are data collection and control devices integrated with network
communication technology for smart grid and substation automation. The D20E modules
are a combination of hardware and software systems with either DNP3 TCP/IP subset
level 2 or IEC 61850 GGIO server protocols.
Each D20E module is designed and implemented with:
•
The input/output allocation for the four different modules:
–
D20E-A: 32 DC Analog Input channels (with 32 high/low alarm points)
–
D20E-K: 32 Control Outputs (can be configured into 4 different control output
types)
–
D20E-S: 64 Digital Inputs (COS and SOE)
–
D20E-C: 8 Control Outputs, 16 Analog Inputs and 16 Digital Inputs
•
Four 10/100Base-T Local Area Network interfaces supporting 2 independent networks
for redundancy;
•
One USB 2.0 console port.
•
Two DC Power Supply inputs for supporting dual mirrored power sources.
All specifications for D20E modules are shown below. These specifications are subject to
change.
Specifications are provided for:
•
Digital inputs
on page 27
•
Control outputs
on page 28
•
Analog inputs
on page 29
•
Power supply
on page 29
•
Enclosure electro-magnetic capability
•
Environmental
on page 30
•
Physical
on page 30
•
Communication ports
GE INFORMATION
on page 30
on page 31
D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
CHAPTER 1: BEFORE YOU START
Advertisement
Table of Contents
