Table of Contents
Advertisement
4.2 Measuring Operation
4.2 Measuring Operation
4.2.1 Basics of Operation
Injury of Hand by Needle or Internal Mechanism
Never touch the inside of the autosampler during operation, as
your hand or finger may be seriously injured by the needle or
internal mechanism.
(1)
Handling sample rack
For taking out the sample rack, slightly lift its gripping section,
and then pull it out toward you.
For mounting the sample rack, put its rear side on the rack
holder, and then slowly insert the rack toward the rear.
Fix the rack at the position where a pin engaging sound can
be heard. After mounting the sample rack on the rack holder,
take the following steps (a) and (b). Be sure to check that the
sample rack is mounted at the correct position.
(a)
Make sure that the sample rack does not move in an
attempt of pushing it toward the rear side of the
instrument.
4 - 4
WARNING
Advertisement
Table of Contents
