7.2 Sample Racks
(2)
Removal of Microplate
(a) Remove the sample rack from the rack holder.
(b) Raise the rack cover.
(c) Take out the microplate from the sample rack.
(3)
Use in Hot and Humid Environment
If the microplate rack for the autosampler equipped with a
thermostat is used in a hot and humid environment, the
microplate may become difficult to remove because it may
come in close contact with the aluminum block due to
condensation. In this case, utilize a blade-edge screwdriver
or the like for removing the microplate.
Figure 7-4 Microplate Rack
7 - 6
Aluminum block