Table of Contents
Advertisement
2.3 Specifications
(8)
Carryover
≤ 0.001 % (Cut injection method)
(9)
Linearity of injection volume
2
: ≥0.999 (Cut injection method)
R
(10) Injection volume accuracy
± 2 %
(11) Minimum injection operating time
Approx. 33 s (under specified condition)
(12) Injection mechanism
X, Y, Z directions: Needle movement
(13) Washing method
Washing with a dedicated pump
Two Fluids wash function for needle inner wash
One Fluid wash function for needle outer wash
Back flush wash function for the injection port seal.
(14) Vial detecting function
Available
(15) Pressure resistance
140 MPa
(16) Material of wetted parts
SUS316, Vespel®, UHMWPE, PTFE, PVDF, FFPM, EPDM,
PP, PEEK, FEP, PCTFE, ETFE
(17) External communication
e-Line
2 - 50
Advertisement
Table of Contents
