Lenovo ThinkSystem SR630 Maintenance Manual page 262

Step 1. Remove the following screws as illustrated:
• 11 slotted screws (with PH2 screwdriver)
• Five slotted screws (with PH1 screwdriver)
• 12 T20 screws on the CPU sockets
• Two guiding pin standoffs (with 7 mm wrench)
• One plunger (with 11 mm and 16 mm wrench)
• Two hexagon bolts on the VGA connector (with 5 mm wrench)
Step 2. Separate the components
Note: Component
After disassembling the system board, comply with local regulations when recycling.
ThinkSystem SR630 V2 Maintenance Manual
252
(with T20 screwdriver)
3 4
1 2 3 4 5 6 7
(PSU airduct) is available only when the CPU TDP is greater than 125 W.
2
from the system board.