Lenovo ThinkSystem SR630 Maintenance Manual page 209

Attention:
• Read "Installation guidelines" on page 83 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK
• Youku: https://list.youku.com/albumlist/show/id_59643656
Procedure
Step 1. Remove the top cover. See "Remove the top cover" on page 220.
Step 2. If there is any PCIe adapter installed on the riser card, record the cable connections first. Then,
disconnect all cables from the PCIe adapter.
Step 3. Grasp the riser assembly by its edges and carefully lift it out of the chassis.
Figure 124. Riser assembly removal
Step 4. If necessary, remove the PCIe adapters that are installed on the riser card. See "Remove a PCIe
adapter" on page 174.
.
Chapter 4 Hardware replacement procedures
199