Keyboard, Mouse, Kvm Switch Or Usb-Device; Problems - Lenovo ThinkSystem SR630 Maintenance Manual

Hide thumbs Also See for ThinkSystem SR630:
Table of Contents

Advertisement

Attention: Moving a color monitor while it is turned on might cause screen discoloration.
Move the device and the monitor at least 305 mm (12 in.) apart, and turn on the monitor.
Notes:
a. To prevent diskette drive read/write errors, make sure that the distance between the monitor and any
external diskette drive is at least 76 mm (3 in.).
b. Non-Lenovo monitor cables might cause unpredictable problems.
2. Reseat the monitor cable.
3. Replace the components listed in step 2 one at a time, in the order shown, restarting the server each
time:
a. Monitor cable
b. Video adapter (if one is installed)
c. Monitor
d. (Trained technician only) System board.
The wrong characters appear on the screen
Complete the following steps until the problem is solved:
1. Verify that the language and locality settings are correct for the keyboard and operating system.
2. If the wrong language is displayed, update the server firmware to the latest level. See "Firmware
updates" on page 11.
Keyboard, mouse, KVM switch or USB-device problems
Use this information to solve problems related to a keyboard, mouse, KVM switch or USB-device problems.
• "All or some keys on the keyboard do not work" on page 242
• "Mouse does not work" on page 242
• "KVM switch problems" on page 243
• "USB-device does not work" on page 243
All or some keys on the keyboard do not work
1. Make sure that:
• The keyboard cable is securely connected.
• The server and the monitor are turned on.
2. If you are using a USB keyboard, run the Setup utility and enable keyboardless operation.
3. If you are using a USB keyboard and it is connected to a USB hub, disconnect the keyboard from the
hub and connect it directly to the server.
4. Replace the keyboard.
Mouse does not work
1. Make sure that:
• The mouse cable is securely connected to the server.
• The mouse device drivers are installed correctly.
• The server and the monitor are turned on.
• The mouse option is enabled in the Setup utility.
ThinkSystem SR630 V2 Maintenance Manual
242

Advertisement

Table of Contents
loading

Table of Contents