Table of Contents
Advertisement
Appendix 6
Appendix 6.1
(1) System configuration
Item
RS-232 port
There is no RS-232 port.
• A programming tool that was available for the
QnUD(E)(H)CPU can no longer be used or
needs to be upgraded. (The use of GX
Developer is not supported in the system
Applicable products and
after replacement.)
software
• Some GOTs and intelligent function modules
that were available for the QnUD(E)(H)CPU
can no longer be used or need to be
upgraded.
Scan time is shortened in the High-speed
Universal model QCPU and Universal model
Process CPU because operations are
performed at higher speed. When used in a
Multiple CPU system
multiple CPU system, the High-speed Universal
model QCPU and Universal model Process
CPU access to the other modules frequently. As
a result, the processing time in other CPU
modules may increase.
Current consumption
The current consumption increases.
*1
This applies when the QnUD(H)CPU is replaced with the High-speed Universal model QCPU.
Precautions for Replacing QnUD(E)(H)CPU
with QnUDVCPU/QnUDPVCPU
Precautions
Precautions
Use a USB or Ethernet port.
*1
To communicate with an RS-232 interface,
use the QJ71C24N(-R2) in the system.
• Upgrade the version of GX Works2 to the
one compatible with the QnUDVCPU and
QnUDPVCPU.
• Replace the GOT and intelligent function
modules with those compatible with the
QnUDVCPU and QnUDPVCPU.
Check the processing timings of other CPU
modules and adjust the access frequency of
the High-speed Universal model QCPU and
Universal model Process CPU using timers or
the constant scan function.
Select a power supply module according to
the total current consumption in the system.
Replacement method
APPENDICES
Reference
---
Page 513, Appendix 5.2
QCPU User's Manual (Multiple
CPU System)
QCPU User's Manual
(Hardware Design,
Maintenance and Inspection)
567
A
Advertisement
Table of Contents
