Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual page 491

CPU module
Q03UDVCPU, Q04UDVCPU, Q04UDPVCPU, Q06UDVCPU,
Q06UDPVCPU, Q13UDVCPU, Q13UDPVCPU, Q26UDVCPU,
Q26UDPVCPU
(12)Batch transfer of data to the program memory
When data in the program cache memory is batch-transferred to the program memory, the processing time listed
in the following table is required.
*1 The time in the table is for the case where the service processing count is set to one.
CPU module
Q00UJCPU, Q00UCPU, Q01UCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU
Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU,
Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU,
Q50UDEHCPU, Q100UDEHCPU
Q03UDVCPU, Q04UDVCPU, Q04UDPVCPU, Q06UDVCPU,
Q06UDPVCPU, Q13UDVCPU, Q13UDPVCPU, Q26UDVCPU,
Q26UDPVCPU
(13) Diagnostics of the
When the "Diagnose Redundant Power Supply System" is selected on the PLC RAS tab of the PLC parameter
dialog box, the processing time listed in the following table is required.
CPU module
Q00UCPU
Q01UCPU
Q02UCPU
Q03UD(E)CPU, Q03UDVCPU, Q04UD(E)HCPU, Q04UDVCPU,
Q04UDPVCPU, Q06UD(E)HCPU, Q06UDVCPU, Q06UDPVCPU,
Q10UD(E)HCPU, Q13UD(E)HCPU, Q13UDVCPU,
Q13UDPVCPU, Q20UD(E)HCPU, Q26UD(E)HCPU,
Q26UDVCPU, Q26UDPVCPU, Q50UDEHCPU, Q100UDEHCPU
*1 A power supply module failure indicates any of the following.
• The redundant power supply module has failed.
• Power for the redundant power supply module is turned off.
• The redundant power supply module is not mounted.
Main base unit
N1
6µs
*1
Scan time = 2ms
redundant power supply system
With a power supply
module failure
Extension base unit
N2 N1
45µs 6µs
Processing time
Scan time = 20ms
2.35ms
2.35ms
1.10ms
1.05ms
1.40ms
0.60ms
Processing time
Without a power supply
*1
module failure
s
125µ
s
125µ
s
90µ
s
43µ
APPENDICES
N2
70µs
5.10ms
4.50ms
3.65ms
3.65ms
A
4.00ms
0.60ms
*1
s
165µ
s
135µ
s
90µ
s
52µ
489