Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual page 48

(2) File size
The size of a file used in the CPU module depends on the file type. When a file is written to the memory area, the
unit of the stored file size depends on the CPU module and memory area to be written.
( Page 50, Section 2.1.3 (4)) Calculate the rough size of each file with reference to the following table.
File type
Drive heading
*1
Default
With boot setting
With CC-Link IE
Controller Network
setting
With CC-Link IE Field
Parameter
Network setting
With MELSECNET/H
setting
With Ethernet setting
With CC-Link setting
With remote
password setting
Sequence program
46
72
• CPU modules other than the High-speed Universal model QCPU and Universal model Process
CPU: 464
• High-speed Universal model QCPU and Universal model Process CPU: 740
*2
84 + (18 × (number of files))
72 + (total parameter sizes of each module) + (size of the routing setting) + (size of the data link
transfer setting)
Parameter size of each module
Size of the routing setting
Size of the data link transfer setting
72 + (total parameter sizes of each module) + (size of the routing setting) + (size of the data link
transfer setting)
Parameter size of each module
Size of the routing setting
Size of the data link transfer setting
Increase up to 6180/module
Increase up to 922/module
Increase up to the values in the following table (The values indicate an increase per module.)
CC-Link setting
1st module
2nd to 4th modules
5th module
6th to 8th modules
92 + (number of target modules × 10), increase up to 172/module
• CPU modules other than the High-speed Universal model QCPU and Universal model Process
CPU:
*3
148 + (4 × ((number of steps) + (number of steps of reserved area for online change)))
• High-speed Universal model QCPU and Universal model Process CPU:
*3
224 + (4 × ((number of steps) + (number of steps of reserved area for online change)))
File size (unit: byte)
Up to 10368 (When only LB/LW(1) is set, 1826 + 16 ×
(number of refresh transfer points).)
6 + 8 × (number of routing settings)
6 + 12 × (number of transfer settings) + 86 × (number of
modules)
Up to 13074
6 + 8 × (number of routing settings)
6 + 16 × (number of RX transfer settings) + 16 × (number
of RWr transfer settings)
Mode setting
Ver.1 mode Ver.2 mode
550 bytes 572 bytes
536 bytes 558 bytes
550 bytes 566 bytes
536 bytes 558 bytes
Ver.2 additional mode
624 bytes
610 bytes
618 bytes
610 bytes