Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual page 312

(2) Instruction
An error occurs when the following operations are performed to devices in the write-protected range from other
CPU modules by using instructions: writing/clearing of device data, writing/transferring of the initial device value
file or file register file.
• Writing or clearing device data by instructions
Classification
Writing to device
Clearing device
• Writing or transferring the initial device value file or file register file by an instruction
Writing or transferring a file by FTP client
(3) File transfer function (FTP server)
An error occurs when the following operations are performed to the CPU module, in which the write-protect
function for device data (from outside the CPU module) is enabled, by using the FTP command: writing/clearing
of device data, writing (transferring)/changing of the initial device value file or file register file.
• Writing/clearing device data by the FTP command
Classification
Clearing device
• Writing (transferring) or changing the initial device value file or file register file by the FTP command
Classification
Writing to file
File change
310
Writing data to the programmable controller in another station
Writing device data from another CPU module
Writing to a notification device for reading/writing data of programmable
controller in another station (with the read/write notification)
Remote RUN when clearing is specified in the clear mode
Classification
Operation
Remote RUN when clearing is specified in the clear mode
Operation
File transfer
Extension change to QDI or QDR
Operation Instruction
SP.WRITE
JP/GP.WRITE
JP/GP.SWRITE
J(P).ZNWR
GP.RIWT
D(P).DDWR
JP/GP.SWRITE
JP/GP.SREAD
Z(P).RRUN
J(P)/G(P).REQ
Instruction
SP.FTPPUT
Command (subcommand)
quote (run)
Command
put
mput
rename