Appendix 1.2.3 Plc File; Appendix 1.2.3 - Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual

Appendix 1.2.3

Parameters required for the files used in the CPU module are set.
Item
*1
File Register
Transfer to Standard ROM at
*1
Latch data backup operation
Comment File Used in a
Command
Device Initial Value
*1
File for Local Device
File used for
SP.DEVST/S.DEVLD Instruction
*1 Not available for the Q00UJCPU.
440
PLC file
Parameter
Description
No.
Set a file for the file register used
1100
H
in the program.
Select whether to batch-transfer
the data in the file register at the
1104
H
time of latch data backup to the
standard ROM.
Set a file for device comments
1101
H
used in the program.
Set a file for initial values of the
1102
H
devices used for the CPU module.
Set a file for local devices used in
1103
H
the program.
Set a device data file used for
1105
writing to or reading from the
H
standard ROM.
Setting range
• Not Used
• Use the same file name as the
program.
• Use the following file.
Checked/unchecked
• Not Used
• Use the same file name as the
program.
• Use the following file.
• Not Used
• Use the same file name as the
program.
• Use the following file.
• Not Used
• Use the following file.
• Not Used
• Use the following file.
Default Reference
Page 390,
Not Used
Section 4.7
Page 253,
Unchecked
Section 3.29
Not Used -
Page 246,
Not Used
Section 3.25
Page 420,
Not Used
Section 6.2
Page 258,
Not Used
Section 3.30