Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual page 489

(b) Online change (files)
When a file is written to the running CPU module, the processing time listed in the following table is required.
*1 The time in the table is for the case where the service processing count is set to one.
CPU module
Q00UJCPU
Q00UCPU
Q01UCPU
Q02UCPU
Q03UD(E)CPU
Q04UD(E)HCPU, Q06UD(E)HCPU, Q10UD(E)HCPU,
Q13UD(E)HCPU, Q20UD(E)HCPU, Q26UD(E)HCPU,
Q50UDEHCPU, Q100UDEHCPU
Q03UDVCPU, Q04UDVCPU, Q04UDPVCPU,
Q06UDVCPU, Q06UDPVCPU, Q13UDVCPU,
Q13UDPVCPU, Q26UDVCPU, Q26UDPVCPU
(8) Non-group output status read
In multiple CPU systems, the scan time increases when "All CPUs Can Read All Outputs" is selected in the
Multiple CPU settings screen of the PLC parameter dialog box.
The scan time increases
when this parameter is set.
Processing time
Scan time = 2ms
Up to 4.00ms
Up to 3.50ms
Up to 3.50ms
Up to 4.80ms
Up to 3.75ms
Up to 3.70ms
Up to 0.8ms
APPENDICES
*1
Scan time = 20ms
Up to 6.20ms
Up to 5.80ms
Up to 5.60ms
Up to 4.80ms
Up to 3.75ms
Up to 3.70ms
Up to 0.8ms
487
A