Factors That Increase The Scan Time - Mitsubishi Electric MELSEC-Q00U(J)CPU User Manual

Appendix 3.3
When executing any of the functions or operations described in this section, add the given processing time in this
section to the time value calculated in Page 469, Appendix 3.1.
(1) Sampling trace
When the sampling trace function (
following table is required.
[Conditions] Processing time (when 50 points of the internal relay (for bit device) and 50 points of the data register
(for word device) are set as sampling trace data)
CPU module
Q00UCPU, Q01UCPU
Q02UCPU
Q03UD(E)CPU
Q04UD(E)HCPU, Q06UD(E)HCPU, Q10UD(E)HCPU,
Q13UD(E)HCPU, Q20UD(E)HCPU, Q26UD(E)HCPU
Standard RAM
Q50UDEHCPU, Q100UDEHCPU
Q03UDVCPU
Q04UDVCPU, Q04UDPVCPU, Q06UDVCPU,
Q06UDPVCPU, Q13UDVCPU, Q13UDPVCPU,
Q26UDVCPU, Q26UDPVCPU
Standard RAM Q03UDVCPU, Q04UDVCPU, Q04UDPVCPU,
(with an extended Q06UDVCPU, Q06UDPVCPU, Q13UDVCPU,
SRAM cassette) Q13UDPVCPU, Q26UDVCPU, Q26UDPVCPU
Q02UCPU
Q03UD(E)CPU
SRAM card
Q04UD(E)HCPU, Q06UD(E)HCPU, Q10UD(E)HCPU,
Q13UD(E)HCPU, Q20UD(E)HCPU, Q26UD(E)HCPU
Q50UDEHCPU, Q100UDEHCPU
*1 When specifying devices in the trigger point setting, the scan time may be increased by up to 0.163µs per instruction.

Factors that increase the scan time

Page 184, Section 3.14) is executed, the processing time listed in the
APPENDICES
Processing time
0.12ms
0.09ms
*1
0.07ms
*1
0.06ms
0.06ms
*1
0.045ms
*1
0.045ms
*1
0.05ms
0.09ms
*1
0.08ms
*1
0.06ms
0.06ms
A
481