Average:average; Average:count; Average:maximum; Average:minimum - HP E1312A User Manual

:AVERage:AVERage?

Example

:AVERage:COUNt?

Example

:AVERage:MAXimum?

Example

:AVERage:MINimum?

Example
74 Multimeter Command Reference
CALCulate:AVERage:AVERage?
AVERage was enabled (
average value is cleared when
the multimeter is reset. The average value is stored in volatile memory.
Query the Average of All Readings Taken Since the
was Enabled
CALC:AVER:AVER?
CALCulate:AVERage:COUNt?
was enabled (
AVERage
count value is cleared when
CALC:STAT ON commands, when power has been off, or after a remote interface
reset. The number of readings taken is stored in volatile memory.
Query the Number of Readings Since the
Enabled
CALC:COUN?
CALCulate:AVERage:MAXimum?
AVERage operation. The max value is cleared when
( and
CALC:FUNC AVER
after the multimeter is reset. The maximum value is stored in volatile memory.
Query the Maximum Value Found During an
CALC:AVER:MAX?
CALCulate:AVERage:MINimum?
function operation. The min value is cleared when
AVERage
( and
CALC:FUNC AVER
after the multimeter is reset. The minimum value is stored in volatile memory.
Query the Minimum Value Found During an
CALC:AVER:MIN?
reads the average of all readings taken since
CALC:FUNC AVER and
AVERage is enabled, when power is removed, or after
Query the average of all readings.
reads the number of readings taken since
and
CALC:FUNC AVER
is enabled by the
AVERage
AVERage
Query number of readings.
reads the maximum value found from an
commands), when power is removed, or
CALC:STAT ON
Query the max value.
reads the minimum value found from an
commands), when power is removed, or
CALC:STAT ON
Query the min value.
CALC:STAT ON commands). The
Math Operation
AVERage
commands). The
CALC:STAT ON
CALC:FUNC AVER
Math Operation was
AVERage is enabled
Math Operation
AVERage
is enabled
AVERage
AVERage Math Operation
and
Chapter 3