Period:voltage:range - HP E1312A User Manual

PERiod:VOLTage:RANGe

Parameters
Comments
Example
PERiod:VOLTage:RANGe?
Example
Chapter 3
[SENSe:]PERiod:VOLTage:RANGe <
signal level of period measurements.
Parameter Name Parameter Type
range
< >
•
To select a standard measurement range, specify range as the input signal's
maximum expected voltage. The multimeter then selects the correct range.
•
selects the minimum range available with the
MIN
command: 100mV.
•
Specifying a fixed range disables the autorange mode set by the
PER:VOLT:RANG:AUTO
•
*RST Condition:
Set the Voltage Range for Period Measurements to 100V
PER:VOLT:RANG 100
[SENSe:]PERiod:VOLTage:RANGe? [MIN|MAX]
numbers to the output buffer:
•
0.1, 1, 10, 100 or 300 corresponding to the range set.
•
MIN returns 0.1.
•
MAX returns 300.
Query the Period Voltage Range
PER:VOLT:RANG?
enter statement
range
>
Range of Values
numeric 100mV|1V|10V|100V|300V|
MAX selects the maximum range available: 300V.
command.
PER:VOLT:RANG 10
Voltage range is 100 V.
Query the voltage range for period
measurements.
Enter response into computer.
Multimeter Command Reference
selects the voltage range for the
Default Units
MIN|MAX
PERiod:VOLTage:RANGe
returns one of the following
volts
137