Current[:Dc]:Resolution - HP E1312A User Manual

CURRent[:DC]:RESolution

Parameters
Comments
CURRent[:DC]:RESolution?
Example
126 Multimeter Command Reference
[SENSe:]CURRent[:DC]:RESolution <
current measurements.
Parameter Name Parameter Type
resolution
< >
•
MINimum selects the best resolution (the smallest value) for the selected range.
selects the worst resolution (the largest value) for the selected
MAXimum
range.
•
You must select a range using
resolution. Also, only specify a resolution when making measurements on a
fixed range. Otherwise, the resolution will change to correspond with the range
selected during autoranging.
•
If autoranging is required, set the resolution using the
•
Changing the resolution also changes the
values that correspond with the resolution specified.
[SENSe:]CURRent[:DC]:RESolution? [MIN|MAX]
numbers to the output buffer:
•
The present current resolution selected if
the resolutions available with the RESolution command are returned. For
example, if
CONFigure
returned.
•
The minimum current resolution available (1µA) if
•
The maximum current resolution available (100µA) if
Query the DC Current Measurement Range
CURR:DC:RES 3
CURR:DC:RES?
enter statement
resolution
Range of Values
numeric resolution|
CURRent:DC:RANGe
NPLC
MIN
selects 10mA resolution, 10mA is the resolution
Select 3A resolution.
Query multimeter to return the present
resolution.
Enter value into computer.
selects the resolution for DC
>
Default Units
amps
MIN|MAX
before specifying
or parameters.
MIN MAX
and setting to the
APERture
returns one of the following
or MAX is not specified. Only
is specified.
MIN
is specified.
MAX
Chapter 3