Table of Contents
Advertisement
dialog-box message LOCAL UNIT STATUS ERROR [002]
DATABASE FULL and the status-bar message
COMMUNICATION ERROR.
If there isn't any problem with the transfer process, the master
unit's status bar displays the message TRANSFER COMPLETE
when done. You can now press any key to resume other
operations.
Moving waypoints and routes from a master unit (export)
When you move waypoints from unit 1 (the designated master)
into unit 2, the entire contents of unit 1 are exported into unit 2.
Also, if any waypoint or route name matches exist, the waypoints
or routes from unit 1 will overwrite the waypoints or routes
already in unit 2.
If you press any function key on the master unit during the
transfer, the error message
HIT
will be displayed, the process will be aborted, and the
master unit will display the particular screen accessed by that
function keypress. You can press any key on the other unit,
however, without interrupting the transfer process.
To purposely stop the transfer at any time, press the
key. If you press the
dialog-box message
and the status bar displays the message
ABORTED
. Waypoints and routes transferred up to that point
are in the receiving unit (be aware that a particular route may
not contain all of its waypoints due to the transfer interruption).
START
Press the
process (this means that all waypoints and routes, not just the
ones already in the receiving unit and the ones left to be
transferred, are re-transferred).
1. Select the unit you'd like to use as the "master." Remember:
You can use either of two units as the master because both
units are capable of importing or exporting waypoints and
routes.
Addendum P/N GM210
NOTE:
TRANSFER ABORTED BY KEY
STOP
key, the master unit displays the
TRANSFER ABORTED BY KEY HIT
key again to re-start the entire transfer
– 14 –
STOP
,
TRANSFER
032101
Advertisement
Table of Contents
