Table of Contents
Advertisement
If you want to import or export to/from older units, these units
all must have software version 3.12 or higher; to obtain any
necessary upgrades, please contact your authorized Northstar
dealer.
Only one unit, designated the "master," enters the import/export
function. The other unit can remain in normal operation as
long as you don't actually add or modify its waypoints or
routes during the transfer process. Any screen can be displayed
during the transfer process, including the IMPORT DATA screen
or the EXPORT DATA screen. You can designate either of the two
units as the master because both units are able to import and
export waypoints and routes; but once you select the master,
make sure you select the correct function for what you want to
do (import copies waypoints and routes into the master unit;
export copies waypoints and routes from the master unit).
Connecting the two units
The two units must be properly connected using specific cables/
connectors and the aux-head ports. For interfacing information,
contact your local Northstar dealer.
Moving waypoints and routes into a master unit (import)
When you move waypoints and routes into unit 1 (the designated
master) from unit 2, the entire contents of unit 2 are imported into
unit 1. Also, if any waypoint or route name matches exist, the
waypoints or routes from unit 2 overwrite the waypoints or routes
already in unit 1.
Addendum P/N GM210
NOTE:
– 10 –
032101
Advertisement
Table of Contents
