Toro Greensmaster e1021 Diagnostic Manual page 69

1. Battery charge indicator
Pass The battery charge indicator shows at least one full block. Go to Step 3.
Fail
The battery charge indicator does not show at least one full block.
1. Move the key switch to the O
2. Disconnect the battery. Refer to
3. Verify that the battery charger is turned off.
4. Connect the battery charger to the battery and charge the battery.
5. Disconnect the battery charger and reconnect the battery to the machine.
6. Repeat Step 2.
Step 3: Access the main contactor.
1. Verify that the key switch is in the O
2. Disconnect the battery. Refer to
3. Remove the white electric cover. Refer to
The main contactor is now visible.
Figure 47
position.
FF
Connecting and Disconnecting the Battery (page
position.
FF
Connecting and Disconnecting the Battery (page
Removing the Electric Cover (page
69
14).
14).
17).
g364041