Toro Greensmaster e1021 Diagnostic Manual page 30

Step 6: Swap the InfoCenter with a known good unit.
1. Verify that the key switch is in the O
2. Remove the 4 fasteners that secure the InfoCenter to the InfoCenter mount.
1. InfoCenter
2. InfoCenter mount
3. Gently lift the InfoCenter and InfoCenter mount up away from the machine to gain access to the display
nut and harness connector P17.
1. InfoCenter
2. InfoCenter mount
4. Unscrew the display nut from the bottom of the InfoCenter.
5. Unplug harness connector P17 from the InfoCenter.
6. Plug harness connector P17 in to the replacement InfoCenter.
7. Turn on the machine by rotating the key switch to the O
position.
FF
Figure 22
3. Fasteners (4)
Figure 23
3. Display nut
4. Harness connector P17
position.
N
30
g365109
g365110