Toro Greensmaster e1021 Diagnostic Manual page 2

Introduction
The purpose of this publication is to provide a service technician with information for diagnostic troubleshooting
and testing of fault codes on the Greensmaster eFlex 1021 and e1021.
Refer to the Greensmaster® 1021 Greensmower Operator's Manual or Greensmaster® eFlex® 1021
Greensmower Operator's Manual for information on operating, maintaining, and adjusting the machine and its
components.
Refer to the Greensmaster® e1021/e1026 Service Manual or Greensmaster® eFlex® 1021 Service Manual for
information on troubleshooting, testing, and repairing the machine and its components.
Refer to the Toro DIAG User's Guide for information on system operation, diagnostics, and machine
programming.
The Toro Company reserves the right to change product specifications or this publication without notice.
Improper use or maintenance by the operator or owner can result in injury. To reduce the potential for injury,
comply with all safety instructions in this manual, and always pay attention to the safety alert symbol (Figure
1), which means caution, warning, or danger (i.e., personal safety instruction.) Failure to comply with the
instruction may result in personal injury or death.
g000502
Figure 1
Safety Alert Symbol
*22259SL*
© 2021—The Toro® Company Original Instructions (EN)
Register at www.Toro.com.
8111 Lyndale Avenue South Printed in the USA
Bloomington, MN 55420 All Rights Reserved