Toro Greensmaster e1021 Diagnostic Manual page 49

Step 6: Replace the motor.
1. Verify that the key switch is in the O
2. Disconnect the battery. Refer to
3. Replace the motor. You can obtain more information about installing and removing a motor in the
machine's service manual (Greensmaster® e1021/e1026 Service Manual or Greensmaster® eFlex®
1021 Service Manual).
Step 7: Use Toro DIAG to program the replacement motor.
1. Connect a PC with Toro DIAG software to the machine via a Toro DIAG Cable (Part No. 115-1944). Refer
to Toro DIAG–Quick Start (page
2. Use the Toro DIAG software to reprogram the machine in accordance with Toro DIAG User's Guide. The
replacement motor is programmed during the reprogramming of the machine.
3. Disconnect the Toro DIAG cable from the machine.
4. Go to Returning the Machine to Service (page 20)
position.
FF
Connecting and Disconnecting the Battery (page
18).
and follow the steps listed.
49
14).