Type Of Display Element - Round Measurement Display - ABB IP Touch 7 Manual

Minimum object value:
Options:
The parameter is used to specify the smallest value that is sent via telegrams to the display
element.
Any value within the limits specified by the object type and its value range can be entered.
Maximum object value:
Options:
The parameter is used to specify the largest value that is sent via telegrams to the display
element.
Any value within the limits specified by the object type and its value range can be entered.
Displayed minimum value:
Options:
The parameter is used to specify the smallest value that is displayed in the display element.
Any value within the limits specified by the object type and its value range can be entered. The
value can deviate from the setting of parameter "Minimum object value".
Displayed maximum value:
Options:
The parameter is used to specify the largest value that is displayed in the display element.
Any value within the limits specified by the object type and its value range can be entered. The
value can deviate from the setting of parameter "Maximum object value".
2.10.11 Type of display element — Round measurement display
Note
For option "Round measurement display" of parameter "Type of display element"
the same supplementary parameters are available, such as for option "Linear
measurement display", see chapter 2.10.8 "Type of display element — Linear
measurement display — Measurement display with colour display" on page 93.
Product manual 2CKA001473B5023
Control elements and application parameter
Setting option depends on the selected object type.
Setting option depends on the selected object type.
Setting option depends on the selected object type.
Setting option depends on the selected object type.
"Display" control element
│96