Unit Of Temperature; Set Value Is Relative; Heating/Cooling Switchover; Fan Coil Control During Heating Mode - ABB IP Touch 7 Manual

2.11.7

Unit of temperature

Options:
The parameter is used to specify the unit with which the temperature is displayed.
2.11.8

Set value is relative

Options:
The parameter is used to specify whether the set value for devices with display is displayed as
relative value, e.g. -5°C - +5°C.
2.11.9

Heating/cooling switchover

Options:
The parameter is used to specify whether the RTC control element can be switched over
between heating and cooling mode.

2.11.10 Fan coil control during heating mode

Options:
The parameter is used to specify whether the fan coil fan is activated during heating mode.

2.11.11 Fan coil control during cooling mode

Options:
The parameter is used to specify whether the fan coil fan is activated during cooling mode.

2.11.12 Setting the temperature unit via object

Options:
The parameter is used to specify whether it is possible to set the temperature unit via a
communication object.

2.11.13 Enable 1-bit communication object "Disable"

Options:
Product manual 2CKA001473B5023
Control elements and application parameter
Control element "RTC control element"
°C
°F
No
Yes
Deactivated
Activated
Deactivated
Activated
Deactivated
Activated
No
Yes
Deactivated
Activated
│103