Additional Tools (Functions); Import - ABB IP Touch 7 Manual

Commissioning of the KNX Function via DCA (from ETS5)
1.13

Additional tools (functions)

You can call up additional tools or functions of the DCA via the DCA icon bar.
1.13.1

Import

1. Click on "Import" in the DCA toolbar, a dialog window with the following entries appears.
– Import master
Import master
Import of masters of a different panel via stpl file.
1. Select the appropriate file in the dialogue window.
2. Click on "Open".
– The master is imported and can be used in the project.
Product manual 2CKA001473B5023
Notice
The master file must first be exported from a different device.
│44