ABB IP Touch 7 Manual page 225

Pos. Description
Door communication and KNX within the flat.
Direct connection between IP touch and KNX IP interface.
1 Static IP address assignment for KNX IP interface via ETS. Static IP address assignment for
LAN interface.
An Internet connection is required for the use of ABB-Welcome
Door communication and KNX in the flat
Use of a common PoE switch
Static IP address assignment for KNX IP interface via ETS.
2
Static IP address assignment for the interface LAN.
An Internet connection is required for the use of ABB-Welcome
Door communication and KNX in the flat
Use of a router (the IP addresses are assigned by the router)
3
The assignment of fixed DHCP addresses is recommended.
[A] Welcome IP door communication
[B] Private area
For further information on IP address assignment, see see chapter 6.2 "Basic information" on
page 223.
Product manual 2CKA001473B5023
Case studies
®
App.
® App.
│225