Display Value In Control Element; Slider Sends - ABB IP Touch 7 Manual

2.6.5

Display value in control element

Options:
The parameter is used to specify whether the value is displayed in the control element.
– Deactivated: No display. No additional parameters available.
– Activated: The following supplementary parameters are displayed:
Status value is controlled by a separate object:
Options:
An additional 1-bit communication object "Status value" is enabled via the parameter. If an
actuator has a separate object to feed back the status, it can be linked with a separate
feedback object.
Unit:
Options:
The parameter is used to enter the unit or the unit sign with which the value is displayed in
the control element.
The length is limited to 20 characters.
Decimal places:
Options:
The parameter is used to specify the number of decimal places of the displayed value.
The number is limited to 2 places.
2.6.6

Slider sends

Options:
The parameter is used to specify whether the signal is sent "When releasing the slider" or
"Cyclic".
– When releasing the slider: No additional parameters available.
– Cyclic: The following supplementary parameter is available:
Telegram is repeated every [sec.]:
Options:
The parameter is used to specify the space of time between two value telegrams.
Product manual 2CKA001473B5023
Control elements and application parameter
Deactivated
Activated
Deactivated
Activated
<Text>
Setting option from 0 - 2
When releasing the slider
Cyclic
Setting option from 0.25 - 1.25 seconds
Control element: "Value slider"
│73