Configuration Of The Operating - ABB IP Touch 7 Manual

Commissioning of the KNX Function via DCA (from ETS5)
1.8 Configuration of the operating pages
Control elements can be inserted into all operating pages (Start pages). Each control element
can be pulled from the "Control elements" area via drag and drop onto the page view in the
work area and pasted there.
The size of the buttons is specified by means of a grid in the page view. Certain control
elements require two buttons and therefore two areas in the grid. The "Audio control" control
element requires at least four areas.
Fig. 4: Operating page with control elements
Product manual 2CKA001473B5023 │29