Export; Preview; Reset Layout; Reset All - ABB IP Touch 7 Manual

Commissioning of the KNX Function via DCA (from ETS5)
1.13.2

Export

1. Click on "Export" in the DCA toolbar, a dialog window with the following entries appears.
– Export image in pid file
– Export in project file
Export image in pid file
This function is used to create an image file (*.pid).
1. Select the target directory in the dialogue window.
2. Assign a file name.
3. Click on "Save".
Notice
The image file can be stored on a micro SD card (SDHC) and in this way
transferred to the IP touch.
Export in project file
This function is used to create a project file (*.stpl).
1. Select the target directory in the dialogue window.
2. Assign a file name.
3. Click on "Save".
Notice
The project file can, for example, be transferred to a different PC and imported
into the commissioning tool.
1.13.3

Preview

With this function you can test to see how project planning would look on a real panel. This
allows you to test whether the project has been parameterized as desired before you create an
image file.
1.13.4

Reset layout

With this function you can reset the user interface of the DCA to the standard display.
Via the combination of "Ctrl" + drag and drop you can place the different windows in the DCA
also at other positions.
1.13.5

Reset all

This function resets all parameter settings to the basic settings. All created pages and the group
addresses will be deleted.
Product manual 2CKA001473B5023 │45