Basic Settings (System Settings) Of The Panel - ABB IP Touch 7 Manual

Commissioning of the KNX Function via DCA (from ETS5)
1.6.1

Basic settings (system settings) of the panel

Notice
Entries in text fields must be confirmed with the return key.
General
Sending/receiving time and date
■
Options:
The device has an internal date and time module. The parameter is used to set how the
device uses the date and time.
– No sending and no receiving: The device uses date and time only internal.
– Only sending: The device synchronizes additional KNX components in the system.
– Only receiving: The device receives date and time from a separate KNX-DCF module.
If you select "Only sending" or "Only receiving", the date and time can be synchronized via a
communication object. The synchronization is carried out by sending a group address to or
from the device.
Link the communication objects "Time output" and "Date output" with a corresponding group
address.
Selection:
1. Click on the arrow.
– The list with available settings opens.
2. Select the setting.
Sending time and date
■
Options:
The parameter is used to specify the time interval at which the device sends the date and
time.
Notice
The parameter is available only when parameter "Send/receive time and
date" is set on "Only sending".
Selection:
1. Click on the arrow.
– The list with available time intervals opens.
2. Select time interval.
Product manual 2CKA001473B5023
No sending and no receiving
Only sending
Only receiving
Every minute
Every hour
Every 12 hours
At 00:00
At 00:02
│23