Status Control Element (Icon/Text) Is Operated Via A Separate Object; Icon Type - ABB IP Touch 7 Manual

2.1.6

Status control element (icon/text) is operated via a separate object

Options:
An additional 1-bit communication object "Status" is enabled via the parameter.
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
2.1.7

Icon type

Options:
The parameter is used to set whether an icon or a text is displayed.
– Icons:
Icons for On:
Options:
The selected icon is displayed when the light is switched on.
Icons for Off:
Options:
The selected icon is displayed when the light is switched off.
– Text:
Text for On:
Options:
The entered text is displayed when the light is switched on.
Text for Off:
Options:
The entered text is displayed when the light is switched off.
Product manual 2CKA001473B5023
Control elements and application parameter
No
Yes
Icons
Text
<Selection of an icon from the list>
<Selection of an icon from the list>
<Text>
<Text>
"Switch" control element
│51