Slider Sends; Brightness Change [%]; Enable 1-Bit Communication Object "Disable - ABB IP Touch 7 Manual

2.4.9

Slider sends

Options:
The parameter is used to specify whether the signal is sent "When releasing the slider" or
"Cyclic".
– When releasing the slider: No additional parameters available.
– Cyclic: The following supplementary parameter is available:
Telegram is repeated every [sec.]:
Options:
The parameter is used to specify the space of time between two dimming telegrams.
2.4.10

Brightness change [%]

Options:
The parameter is used to set the number of steps (in percent) for dimming. The brightness
change takes place when the slider is released.
2.4.11

Enable 1-bit communication object "Disable"

Options:
There is the option of temporarily disabling the function via an additional communication object
"Disable".
Product manual 2CKA001473B5023
Control elements and application parameter
When releasing the slider
Cyclic
Setting option from 0.25 - 1.25 seconds
Setting option from 1 - 20
Deactivated
Activated
Control element: "Dimmer slider"
│67